Sagging Floor Repair in NZ: Causes, Fixes and Who to Call

A sagging floor is repaired by finding out why it moved first, then fixing that cause, then making good the lining, flooring and finishes around it. The order matters. Lifting a floor without knowing whether the problem is a failed pile, a cut joist, borer, damp or shifting ground can leave you paying twice. For most Auckland homeowners the job has two parts: a structural assessment, and a managed repair with the right trades and consents. We run the second part as one team with one point of contact.
This guide is written for homeowners and first-time buyers. It explains the signs, the usual causes, what a sensible repair looks like in New Zealand, what the consent rules say, and what to ask before you sign anything.
TL;DR
A floor that bounces, slopes or feels uneven is often the first sign of a subfloor problem, and damaged or understrength subfloor timbers must be repaired or replaced whatever the cause.
Diagnose before you repair: piles, bearers and joists, borer, moisture and ground movement all look alike from above.
Structural work on a house generally needs a building consent and qualified people. Do not jack or prop a floor yourself.
Re-levelling is not just lifting until a spirit level reads zero. The aim is sound support and acceptable levels, with finishes made good afterwards.
We manage the building work, trades and consent process under one fixed-fee contract, so you deal with one person from start to finish.
Table of Contents
What a sagging floor is telling you
Most people notice the symptoms before the floor itself. Look for:
A floor that bounces or feels springy when you walk across it.
A noticeable slope, or a marble or ball that rolls to one side.
Doors and windows that stick or no longer close properly.
Gaps between the skirting boards and the floor.
Cracks in GIB or plaster linings, especially running from door and window corners.
Furniture that rocks or leans.
New Zealand’s Building CodeHub, run by the government’s building regulator, says a bouncy or springy floor, or one that is noticeably uneven, is often the first indication of a problem with the subfloor framing. The subfloor framing is the timber structure under your floor: the joists that carry the floorboards, the bearers that carry the joists, and the piles that carry the bearers. The same guide says any damaged or understrength subfloor timber must be repaired or replaced regardless of the cause.
A small amount of movement is normal in an older house. Significant unevenness is not something to live with, and it is worth getting looked at before you renovate over the top of it.
Bounce versus slope: two different problems
The two symptoms usually point in different directions.
Bounce is about how the floor spans between supports. BRANZ, the building research body, explains that a bouncy timber floor generally means joists that are too small for the distance they span. Sometimes they were undersized from the start. More often their depth was reduced during construction or a later renovation, for example by drilling a hole at midspan for a waste pipe. BRANZ also notes that bounce becomes noticeable once deflection passes roughly 1 mm per 300 mm of span, or 1 mm per 360 mm under tiles.
A worked example: a joist spanning 3.0 m (3,000 mm) can flex about 10 mm before the floor starts to feel bouncy. Under tiles, the limit is about 8 mm. If you can see or feel more than that, the joists, or the way they were altered, are the likely cause.

Slope is about the supports themselves. Sunken, rotten or shifted piles, bearers that have dropped, or ground that has moved will let one part of the house sit lower than another. Slope across a whole room is more often a pile or ground issue than a joist issue.
The usual causes
Piles and bearers
Older Auckland houses commonly sit on timber or concrete piles. Timber piles rot, concrete piles can shift or crack, and bearers can sag or split. Any of these lets the floor above drop.

Joists weakened by alterations
Plumbers and electricians sometimes notch or drill joists to run pipes and cables. Past alterations, particularly unconsented ones, are a classic cause of a floor that has become bouncy years after a renovation.
Borer, rot and termites
Timber that has been eaten or has rotted loses strength. In the subfloor it is easy to miss because nobody looks there. If you want to check the timber yourself before an assessment, termite checks under the house show what to look for. Termites are less common in Auckland than in some Australian regions, but borer and rot are not.
Moisture
The government’s weathertightness diagnosis guide lists sagging or uneven floor surfaces among the visual signs of moisture problems, along with swollen skirtings, stained or rotting carpet, mould and a musty smell. A floor that sags because the subfloor is wet will not be fixed by new piles. The water source and ventilation need dealing with first. Our guide to subfloor moisture repair in NZ covers causes, fixes and ventilation.
Ground movement and drainage
Soil that shrinks, swells or washes away under a footing lets a house settle unevenly. Poor drainage around or under the house makes this worse. This is the cause where an engineer’s input matters most, because the repair has to address the ground as well as the structure.
When to stop and get help straight away
Some situations are urgent. If the floor has suddenly dropped, feels at risk of collapse, moves markedly under normal use, or the supports are visibly damaged, keep people out of that area. Do not jack or prop the floor yourself. Get urgent professional help, and call 111 if anyone is in immediate danger. Be especially careful after an earthquake, a slip, excavation near the house or flooding.
If you are only looking at a slow slope or a bouncy patch, you have time to do this properly. Avoid putting heavy loads such as a water bed, a piano or a full bookcase on the affected area until it has been assessed.
Step 1: Get the cause assessed
An assessment is the part nobody should skip. Its job is to establish the cause, how far the floor has moved, and what outcome you are aiming for.
What it should cover:
The subfloor itself: piles, bearers, joists, bracing, ventilation and signs of moisture or borer.
Levels: a floor-level survey, or measurements over time if the movement may be ongoing.
The likely cause: structural, moisture, ground or a mix.
A recommended repair with the amount of lift or support involved.
You can do a rough check yourself for bounce. BRANZ describes fixing a batten to the ceiling below at the greatest joist span, with a marking pen at the free end, so the range of vertical movement is recorded on paper as the floor deflects. It is only a first look. It does not replace someone examining the subfloor.
For the assessment, use an independent building inspector or a structural engineer, depending on how serious the signs are. A geotechnical engineer is relevant if ground movement is suspected. Auckland price ranges published in 2026 for inspection work give a sense of scale: a pre-purchase building report of $500 to $900, specialist trade reports from $250 to $600 per trade, and geotechnical reports from $1,500 to $5,000 or more. Treat these as ranges, and ask for a written scope and price before booking.
If you are a first-time buyer, a floor problem found during a pre-purchase inspection is a negotiating point and a budget item. Get the repair scoped before you go unconditional, not after.
Step 2: Choose the right repair for the cause
There is no single fix for a sagging floor. The cause decides the method.
Cause | Typical repair direction | What else usually follows |
Failed or sunken piles | Support the house, replace or add piles, re-level to the agreed tolerance | Bracing, making good skirtings, linings, plumbing |
Sagging or split bearers | Replace or reinforce the bearers | Re-levelling of joists above |
Undersized or cut joists | Sister (fix alongside) or replace joists, add blocking or intermediate support | Floor finish repairs |
Borer or rot | Replace affected timber, treat the cause | Moisture and ventilation work |
Wet subfloor | Fix drainage, ventilation and water sources first | Timber repairs, then levels |
Ground movement | Engineered solution designed for the ground | Re-levelling, consent, monitoring |
One point from the research is worth keeping in mind. Re-levelling a suspended floor is not simply lifting until a spirit level reads zero. Moving a house affects linings, doors, plumbing, bracing, connections and any additions attached to it. A good assessment sets the intended outcome and the amount of movement allowed before work starts. Sometimes restoring sound support without a perfectly flat surface is the more sensible target, especially in an older house.
If the floor is only slightly out and the issue is the surface rather than the structure, for example before laying new flooring, a different rule applies. Our guide to the 3mm/3m rule for levelling before flooring explains when levelling the surface is enough.
Consent and who can do the work
This is where homeowners most often get caught out, so the rules are worth knowing.
Under Schedule 1 of the Building Act 2004, owners can repair, maintain and replace parts of a building without consent if comparable materials are used and the replacement is in the same position. The government’s building guidance gives an example: an owner replacing old, rotten wooden piles with new treated timber piles in the same positions is exempt, provided it is not a complete or substantial replacement.
That exemption is narrow. Re-piling a whole house, changing pile positions or type, altering bracing, or replacing structural framing on a larger scale is a different matter and generally needs a building consent. When consent is needed, restricted building work on the structure must be carried out or supervised by a Licensed Building Practitioner. The council is the final word, so check with it before work begins.
Two of our guides cover this ground: building consent exemptions in NZ and the building consent process from plans to code compliance certificate. Read them before you assume a job is exempt.
What a repair involves, in order
While each job differs, a managed structural floor repair tends to run in this sequence:
Assess and scope. Which piles, bearers or joists are affected, and how far the floor needs to move.
Check consent. Decide whether the work is exempt or needs a consent, and prepare the documents.
Gain access. This often means lifting floor coverings or removing skirtings, and clearing the subfloor.
Support and repair. Temporary support, then the structural repair itself, designed by an engineer where required.
Inspections. Council inspections where a consent applies.
Make good. Skirtings, linings, plumbing, drainage adjustments, flooring, plastering and paint.
The last step is the one homeowners underestimate. A repaired structure still leaves cracked linings, stuck doors, disturbed floor coverings and marked paint. These need several trades in the right order, and that sequencing is where a single managed contract helps. We coordinate our licensed trades and the consent process, so the making-good step does not turn into a series of separate callbacks.
What affects the cost
We do not publish a price for sagging floor work, because it depends entirely on the cause and the scope. The items that drive a quote are:
The initial inspection and any subfloor or moisture investigation.
Floor-level survey or monitoring.
Structural design, where an engineer is involved.
Timber or support repairs.
The re-levelling itself.
Consent and verification, including council fees, inspections and documents.
Associated work: plumbing, drainage, floor finishes, skirtings and decoration.
When you compare quotes, compare them on the same basis. Check that each one includes or excludes GST in the same way, whether the consent is included, whether bracing is covered, how rotten timber found during the work is priced, and whether making good is part of the price. A low figure that leaves out consent, bracing and finishes is not the cheaper job.
Perspective
Most floor problems we are asked about start as a cosmetic complaint: a gap at the skirting, a door that catches, a crack above a window. The homeowner assumes the fix is a plane and some filler. Sometimes it is. Often the symptom is the end of a longer story under the floor. Our view is that the sequence decides whether a repair lasts. Diagnose first, repair the cause second, then rebuild the finishes properly. That last stage is where a lot of renovation stress comes from, because the structural fix, the plumbing adjustments, the plastering, the painting and the flooring all depend on each other. That is why we run renovations as one team with one point of contact. We manage the trades and the building consent process, and we quote a fixed fee against an agreed scope. For a homeowner facing a sagging floor, that means one person to talk to, one plan for the order of work, and no gaps between trades about who is responsible for the skirtings or the lining cracks. If you are a first-time buyer who has just found a floor problem in your new house, get the cause assessed before you plan anything else. Then bring us the report and we will help turn it into a scoped, managed job. Rudi
Where we fit in
We handle the whole renovation from start to finish: project management, building, plumbing, electrical, plastering, painting and flooring, with the consent process managed for you. For a floor problem, that covers the work around the assessment: planning the sequence, coordinating the trades and restoring the rooms afterwards. If the floor problem is part of a bigger project, such as a kitchen or bathroom on the same floor, or repairs after water damage, we can scope it as a single job.
See our Full Home Reno and Flood Restoration page for how larger projects work, or start at Sorted Home Solutions to tell us what you are dealing with in your Auckland home.

Smaller jobs after the repair, such as touch-up painting, patch repairs, sealant refreshes and fixture swaps, are listed on our small jobs page.
A checklist before you commit
Before signing any contract for floor repair:
Have the cause established in writing by a building inspector or engineer.
Confirm whether a building consent is needed, and who applies for it.
Ask for a fixed scope that lists the structural work and the making good separately.
Ask how rotten or damaged timber found once the floor is opened will be priced.
Confirm that the people doing structural work are Licensed Building Practitioners where the rules require it.
Agree the target for levels, and what happens to doors, linings and floor finishes.
If you want a second set of eyes on a quote before you decide, we are happy to look at how the scope is laid out.
FAQ
How can I fix a sagging floor in my old house?
Start by finding the cause: piles, bearers, joists, borer, moisture or ground movement. The repair then follows the cause, from replacing damaged timber to supporting and re-levelling the house. Structural work generally needs a building consent and qualified people, so check with your council first.
Can I fix a sagging floor myself?
Minor repairs such as replacing a rotten pile like for like in the same position can be exempt from consent, but anything that changes the structure is a different matter. Do not jack or prop a floor yourself, because lifting can damage linings, plumbing and bracing. An assessment first tells you what is safe and lawful.
Is a bouncy floor the same as a sagging floor?
Not quite. Bounce usually means the joists are too small for their span or have been weakened by drilling or notching. Sagging or slope more often points to piles, bearers or the ground. Both are signs of subfloor problems that need checking.
Does a sagging floor always mean the foundations are failing?
No. Moisture, borer, rot and past alterations can cause the same signs, and new piles will not fix a wet subfloor. That is why an assessment comes before any quote.
Sources
Recommended


Comments